Equipment
Separate control panel for precise and easily operation
All functions can be easy operated with one hand. The speed of all functions is continuously adjustable. The precise switching on and off of the watering system, as well as the stepless adjustment of the amount of water, enables constant humidification of the riding arena.
Heavy duty leveling blade
The special shape of the leveling blade makes it possible to carry a large amount of sand. The long side wings prevent the sand from running off to the side. With a blade height adjustment of 150 mm, sand can also be distributed with the machine raised ein seitliches Abfließen des Sandes verhindert. Mit einer Schildhöhenverstellung von 150 mm kann auch noch mit angehobener Maschine Sand verteilt werden.
Angled adjustable leveling blade at the push of a button
In order to level sloping ground (sand accumulations in the corners), the leveling blade can be set at an angle. Even in a tilted position, it can be raised and lowered in parallel as usual.
Hydraulic adjustable gooming rods
The hydraulic gooming rods can be used in many ways. During operation, sand may deposit/stick to the rods. To remove this deposit, the tines can be raised hydraulically, automatically scraping the sand.
The working depth of all rods can be easily adjusted by moving the stop screws. Each rod can also be adjusted individually.
High-performance water system for maximum water intake
The water system consists of:
- Water tank with a capacity of 1500 liters
- shut-off valve
- Water filter with washable stainless steel sieve
- Water pump with 110 l/min
- Changeable water nozzels with membrane switch-off
- Switching valve for manual watering with a hose
Best cutting quality
The new developed blade shape guarantees the best cutting properties over the entire service life. No more sticking sand to the clay layer. The blades themselves are made of highly wear-resistant steel.
Special care was taken to ensure that the sand can deposit as little as possible on the blade attachment. Thanks to a special attachment, the blades can be exchanged in a very short time -
For a perfect finish
The finisher is optimized for steady sand mixing. Large lumps of sand are broken up into small pieces. During development, great importance was taken to a possibly strip-free sand surface.
Easily adjustable working depth limitation
In order to adjust the end stop to the desired working depth, spacer plates can be swiveled in or out.
Without the additional autopilot function, this can be used for safety. The machine can´t be lowered too deep into the riding arena floor.
